Ohio · Est. 1988
Woodpeckers
Woodpeckers makes precision woodworking squares, rules and layout tools at its manufacturing operation in Strongsville, Ohio, and dates the company to 1988. Its store also sells plans, lumber and apparel that it does not make.
Is Woodpeckers made in the USA?
Mostly. Woodpeckers carries our Most Products Made in USA tier: its core line is made in the United States, but some items or components come from abroad, so check the label on the specific product. Woodpeckers's American-made products are manufactured here. 6 of the 6 Woodpeckers products listed here are individually marked as made in the USA. Woodpeckers is based in Ohio and was founded in 1988.
Reading the label yourself: Made in USA labels explained.
USA Manufacturing
Manufacturing in USA
Their line
Featured Products
Woodpeckers
Woodpeckers Aluminum Precision Woodworking Squares
A woodworking square with a one-piece core machined from cast and ground aluminum plate, with pinned cheeks set back to form a shoulder so it rests on a board edge without being held. Scales are laser engraved on both sides of the blade, and sizes run from 6 to 26 inches with a wall-mounted rack. Woodpeckers builds it in Strongsville, Ohio.
Woodpeckers
Woodpeckers Paolini Pocket Rules
A one-inch-wide pocket rule with a stop that slides along the blade for repeat marks and can stand the rule upright for setting bit and blade heights. It comes in anodized aluminum (1/8 inch thick) or stainless steel (1/16 inch thick), in 6, 8 and 12 inch lengths with inch, metric or combination scales. The product page carries a Made in USA badge.
Woodpeckers
Woodpeckers Woodworkers Edge Rule
An angled rule that sits on the corner of a board so one mark can be made on the face and edge together, with an 89 degree inside angle and beveled edges. It is anodized red with a laser-engraved 1/32 inch scale and includes a sliding stop for repeat marks. Lengths run from 6 to 36 inches plus metric sizes.
Woodpeckers
Woodpeckers Saddle T-Squares
A wrap-around marking square CNC milled from a single block of aluminum, with a 3/4 inch deep reference edge for carrying a mark from face to edge. The blade has pencil holes spaced 1/32 inch apart and a white engraved scale on red anodizing. Sizes are 4, 6, 8 and 12 inches, machined in Strongsville, Ohio.
Woodpeckers
Woodpeckers Precision Woodworking T-Squares
A T-square pairing a laser-engraved aluminum blade with a machined beam, held by stainless steel screws, with two lips on the beam to stop tipping. The blade has pencil guide holes every sixteenth of an inch and 1/4 inch holes on 1 inch centers for shelf pins. It comes in 12, 24 and 32 inch and 600mm lengths and is made in Strongsville, Ohio.
Woodpeckers
Woodpeckers Joiner's Saddle Square
A two-sided layout square for joinery, each side machined from solid aluminum billet and joined with stainless screws. It has rows of 1mm pencil holes on 1/32 inch spacing for parallel lines, a 45 degree milled edge, and slots at 30, 45, 60 and 90 degrees. It is machined and inspected at the company's facility in Strongsville, Ohio.
Keep browsing
More tools made in America
New Mexico · Est. 1978
Santa Fe Stoneworks
Santa Fe Stoneworks is a family-run studio based in Santa Fe, New Mexico, led by Sally, Bill, Anna & Miles Wirtel. The brand blends a gallery with its production facilities housed in a century-old adobe ranch house, highlighting a hands-on, place-based craft tradition. Their catalog spans diverse artisanal pieces, including Damascus Collection, Exotic 1911 Grips, jewelry, and other handcrafted items, all produced in-house at the Santa Fe facilities. The company emphasizes that its products are hand-made and typically hand-crafted after an order is placed, underscoring domestic craftsmanship in the United States.
View brandArkansas
Dan's Whetstone Company
Dan's Whetstone Company quarries Arkansas novaculite and makes natural sharpening stones at its factory in Pearcy, Arkansas, overseeing the work from quarry to finished stone. Some sharpeners pair the natural stone with a man-made silicon carbide stone.
View brandNorth Dakota · Est. 2020
Little Wolf Ironworks
Little Wolf Ironworks, founded in 2020 by Cody Adolphson, is proudly based in North Dakota, where craftsmanship meets passion. The brand specializes in hand-forged Damascus and high-carbon steel knives—ranging from hunting to chef blades—crafted with premium materials such as hardwoods, antlers, bone, tusk, and composites. Their commitment to American-made workmanship is highlighted by hand-crafted production in North Dakota, USA, and a promise of heirloom quality through everyday artisan blades, backed by the Wolfpack Warranty. The catalog showcases a focused lineup—FANG, HUNTER, OMEGA, and MINI SKINNER—with options to customize your blade via the Craft My Custom Blade program. Custom Blades is promoted as a path to a truly unique piece.
View brandMichigan · Est. 1969
TEKTON
TEKTON is a well-known hand-tool brand offering a broad range of essentials, including sockets, ratchets, wrenches, screwdrivers, pliers, and storage solutions. The company presents itself as U.S.-based in part, noting that some tools are manufactured in Michigan and that certain products are made entirely in the United States using USA-made materials. TEKTON maintains a growing lineup of USA-made tools, including items like angle head wrenches, crowfoot wrenches, punches, and screwdrivers. You can explore these USA-made options on Tekton’s USA-made tools pages and related posts, and verify country of origin on product pages as you browse.
View brandIndiana · Est. 1984
Trusty-Cook
Trusty-Cook is a U.S.-based manufacturer and a pioneer in industrial polyurethane products, with a history rooted in founder Jon Trusty, Sr., who introduced polyurethane dead blow hammers in the 1960s. That early innovation helped lead to Stanley Tools purchasing the company in 1980, and Trusty-Cook re-emerged in 1990 with a re-engineered hammer, continuing to push polyurethane innovation. Today, Trusty-Cook’s offerings include dead blow hammers, polyurethane spindle liners, hush tubes for screw machines, wear shoes, and other custom polyurethane parts for machines and industrial accessories, all designed and manufactured with an emphasis on professional-grade quality. The company is based in Indianapolis, Indiana, USA, and welcomes international inquiries, indicating their manufacturing operations are rooted in American industry.
View brandWest Virginia · Est. 1854
Warwood Tool Company
Warwood Tool Company is a family-owned American tool brand with roots dating back to 1854. They state that they forge tools out of US steel to make America’s strongest hammers, bars, axes and other hand tools, with their shop in Wheeling, West Virginia. The company emphasizes that it remains family-owned and produces 100% American sourced and manufactured products. Their product lineup centers on hand-forged tools, including hammers, bars, axes, and sledges, all marketed as made in the USA. They also serve rail and infrastructure markets with track components forged by hand from 100% high-carbon, Grade B American steel and designed to meet AREMA specifications. Warwood highlights American manufacturing throughout its site, including explicit statements about 100% MADE IN AMERICA on their industries page.
View brand