Woodpeckers Precision Woodworking T-Squares
A T-square pairing a laser-engraved aluminum blade with a machined beam, held by stainless steel screws, with two lips on the beam to stop tipping. The blade has pencil guide holes every sixteenth of an inch and 1/4 inch holes on 1 inch centers for shelf pins. It comes in 12, 24 and 32 inch and 600mm lengths and is made in Strongsville, Ohio.
Last Price: $140
Buy at retailerAffiliate link: Made America may earn a commission. Price set by the brand.
Made in USA facts
- This product: Manufactured in USA
- Woodpeckers tier: Most Products Made in USA
- USA scope: Manufacturing in USA
- Company based in Ohio
- Founded in 1988
Ohio
Woodpeckers
About the maker
Meet Woodpeckers.
Woodpeckers makes precision woodworking squares, rules and layout tools at its manufacturing operation in Strongsville, Ohio, and dates the company to 1988. Its store also sells plans, lumber and apparel that it does not make.
Full brand profileSame maker
More from Woodpeckers
Woodpeckers
Woodpeckers Aluminum Precision Woodworking Squares
A woodworking square with a one-piece core machined from cast and ground aluminum plate, with pinned cheeks set back to form a shoulder so it rests on a board edge without being held. Scales are laser engraved on both sides of the blade, and sizes run from 6 to 26 inches with a wall-mounted rack. Woodpeckers builds it in Strongsville, Ohio.
Woodpeckers
Woodpeckers Paolini Pocket Rules
A one-inch-wide pocket rule with a stop that slides along the blade for repeat marks and can stand the rule upright for setting bit and blade heights. It comes in anodized aluminum (1/8 inch thick) or stainless steel (1/16 inch thick), in 6, 8 and 12 inch lengths with inch, metric or combination scales. The product page carries a Made in USA badge.
Woodpeckers
Woodpeckers Woodworkers Edge Rule
An angled rule that sits on the corner of a board so one mark can be made on the face and edge together, with an 89 degree inside angle and beveled edges. It is anodized red with a laser-engraved 1/32 inch scale and includes a sliding stop for repeat marks. Lengths run from 6 to 36 inches plus metric sizes.
Woodpeckers
Woodpeckers Saddle T-Squares
A wrap-around marking square CNC milled from a single block of aluminum, with a 3/4 inch deep reference edge for carrying a mark from face to edge. The blade has pencil holes spaced 1/32 inch apart and a white engraved scale on red anodizing. Sizes are 4, 6, 8 and 12 inches, machined in Strongsville, Ohio.
Other makers
More tools made in America
Kreg Tool Company
Pocket-Hole Jig 720PRO
The Pocket-Hole Jig 720PRO is Kreg Tool Company’s most advanced pocket-hole jig, engineered to deliver lightning-fast, rock-solid joints. Its redesigned drill-guide and quick-clamp system help produce consistent results across a variety of stock, and on-board storage keeps accessories close at hand for streamlined setup. Durability comes from hardened-steel drill guides paired with an impact-resistant polymer body and a robust steel frame, backed by a lifetime warranty on the drill guides. Kreg emphasizes American design and engineering, with many products manufactured at their Iowa facility and final assembly and quality control performed in the United States. This approach aligns the 720PRO with a craftsmanship-forward, Made-in-America narrative, reinforcing its durability and long-term performance in domestic shops. Some components may be sourced globally, but the company’s U.S. assembly and QA process underpins the product’s stated build quality.
Little Wolf Ironworks
Little Wolf Ironworks Hunter Knife (OD Green G10/Kydex)
Little Wolf Ironworks' Hunter Knife (OD Green G10 / Kydex) is a field-ready tool built for reliability. The OD Green G10 handle provides a secure, textured grip in wet or gritty conditions, while the Kydex sheath offers solid retention and fast, dependable access on the trail. Designed for hunting and outdoor chores, the knife pairs a practical blade profile with durable, low-maintenance hardware—a hallmark of Little Wolf Ironworks. Made in America, this knife embodies the craftsmanship and ethos of American knife-making. From material choice to finish and fit, it reflects a commitment to durability, repairability, and long service life. In the hands of outdoor enthusiasts, the Hunter Knife stands as a proud example of domestic production and American ingenuity in a compact, ready-for-action tool.
TEKTON
TEKTON Angle Head Open End Wrench Set, 11-Piece (1/4-3/4 in.)
TEKTON's Angle Head Open End Wrench Set is an 11-piece SAE collection covering 1/4 in to 3/4 in, designed for hard-to-reach fasteners. The wrenches feature a 30-degree angled head on one end to improve access in tight spaces, with the traditional open-end profile on the opposite side. The set includes a modular organizer for secure, organized storage. TEKTON emphasizes that this line is manufactured entirely in the USA using USA-made materials. Craftsmanship is evident in features such as laser-engraved size markings, chamfered handles on most sizes, and a durable finish achieved through machining, engraving, vibration polishing, abrasive blasting, and plating. The American-made lineage reinforces TEKTON’s commitment to domestic manufacturing and USA-made materials.
Medford Knife & Tool
Medford Praetorian Scout M/P
A compact folding knife in Medford's Praetorian line, with a 3.75 inch D2 tool steel tanto blade, a G10 scale on the show side and a titanium liner lock. It is 5.25 inches long when closed, weighs 8.4 ounces and comes in three G10 colors. Medford builds it in Phoenix, Arizona.